20 Best Raspberry Pi 3 Servo Hat of 2022

Are you looking for the best Raspberry Pi 3 Servo Hat? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling Raspberry Pi 3 Servo Hat.


Having trouble finding a great Raspberry Pi 3 Servo Hat?


This problem is well understood by us because we have gone through the entire Raspberry Pi 3 Servo Hat research process ourselves, which is why we have put together a comprehensive list of the best Raspberry Pi 3 Servo Hats available in the market today.


After hours of searching and using all the models on the market, we have found the best Raspberry Pi 3 Servo Hat for 2022. See our ranking below!

We Recommended:

# Preview Product
1
MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible...
MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C…
2
Geekworm Raspberry Pi 4B/3B+/3B Full Function Motor HAT, Robot Expansion Board Support Raspberry Pi...
Geekworm Raspberry Pi 4B/3B+/3B Full Function Motor HAT, Robot Expansion Board Support Raspberry…
3
Motor Driver HAT for Raspberry Pi Onboard PCA9685 TB6612FNG Drive Two DC Motors I2C Interface 5V 3A...
Motor Driver HAT for Raspberry Pi Onboard PCA9685 TB6612FNG Drive Two DC Motors I2C Interface 5V…
4
Servo Driver HAT for Raspberry Pi/Jetson Nano 16-Channel 2-bit I2C Interface PCA9685 Driver Supports...
Servo Driver HAT for Raspberry Pi/Jetson Nano 16-Channel 2-bit I2C Interface PCA9685 Driver…
5
Waveshare Servo Driver Hat for Raspberry Pi 3B+ 3B 2B Zero WH Zero W Zero 16 Channel PWM Outputs 12...
Waveshare Servo Driver Hat for Raspberry Pi 3B+ 3B 2B Zero WH Zero W Zero 16 Channel PWM Outputs…
6
KEYESTUDIO ReSpeaker 2-Mic Pi HAT V1.0 for Raspberry Pi 4/4B, Raspberry Pi 3 3B /2B
KEYESTUDIO ReSpeaker 2-Mic Pi HAT V1.0 for Raspberry Pi 4/4B, Raspberry Pi 3 3B /2B
7
KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry Pi...
KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry…
8
KEYESTUDIO L298P Motor Driver HAT Shield GPIO for Raspberry Pi Model B/B+/A+/2/3/4 Zero and Zero W,...
KEYESTUDIO L298P Motor Driver HAT Shield GPIO for Raspberry Pi Model B/B+/A+/2/3/4 Zero and Zero…
9
Freenove 4WD Smart Car Kit for Raspberry Pi 4 B 3 B+ B A+, Face Tracking, Line Tracking, Light...
Freenove 4WD Smart Car Kit for Raspberry Pi 4 B 3 B+ B A+, Face Tracking, Line Tracking, Light…
10
2327 - Raspberry Pi PWM Servo Hat Development Board
2327 – Raspberry Pi PWM Servo Hat Development Board
11
UCTRONICS PoE hat for Raspberry pi
UCTRONICS PoE hat for Raspberry pi
12
SunFounder PCA9685 16 Channel 12 Bit PWM Servo Driver Compatible with Arduino and Raspberry Pi
SunFounder PCA9685 16 Channel 12 Bit PWM Servo Driver Compatible with Arduino and Raspberry Pi
13
KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects
KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects
14
HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
15
DollaTek Raspberry Pi 3 Stepper Motor HAT Full Function Robot Expansion Board for Raspberry Pi 3,Pi...
DollaTek Raspberry Pi 3 Stepper Motor HAT Full Function Robot Expansion Board for Raspberry Pi…
16
Freenove Robot Dog Kit for Raspberry Pi 4 B 3 B+ B A+, Walking, Self Balancing, Ball Tracing, Face...
Freenove Robot Dog Kit for Raspberry Pi 4 B 3 B+ B A+, Walking, Self Balancing, Ball Tracing,…
17
HSU Development Kit for Raspberry Pi 3 Pi 4 and Arduino with 16 Different Sensor Modules,Hundreds...
HSU Development Kit for Raspberry Pi 3 Pi 4 and Arduino with 16 Different Sensor Modules,Hundreds…
18
Freenove RFID Starter Kit for Raspberry Pi 4 B 3 B+ 400, 544-Page Detailed Tutorials, Python C Java...
Freenove RFID Starter Kit for Raspberry Pi 4 B 3 B+ 400, 544-Page Detailed Tutorials, Python C…
19
kuman Compatible For Arduino Raspberry pi Sensor kit, 37 in 1 Robot Projects Starter Kits with...
kuman Compatible For Arduino Raspberry pi Sensor kit, 37 in 1 Robot Projects Starter Kits with…
20
Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
Adafruit RGB Matrix HAT + RTC for Raspberry Pi – Mini Kit

20 Best Raspberry Pi 3 Servo Hat Reviews in 2022

Bestseller No. 1


MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible…

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven; 2.You should connect higher power supply for higher-power servo;…
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the…
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano.
  • I2C controlled, using only 2 pins; Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales); Integrates 5V regulator, up…

Bestseller No. 2


Geekworm Raspberry Pi 4B/3B+/3B Full Function Motor HAT, Robot Expansion Board Support Raspberry Pi…

  • DIY Your Robot! Stepper Motor/Servo/Motor/Sensors/IR Romote Full function Motor HAT Robot Expansion Board for Raspberry Pi 4 / 3 B+ / 3B / 2B / B+ /…
  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors…
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection; Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil,…
  • One Infrared Receiver(GPIO26) with Big terminal block connectors to easily hook up wires (18-26AWG) and power, Polarity protected 2-pin terminal block…
  • [Video&Document] Refer to Geekworm WiKi search (Robot_Expansion_Board), this is a DIY product, all the information are on the WIKI page, pls read the…

Bestseller No. 3


Motor Driver HAT for Raspberry Pi Onboard PCA9685 TB6612FNG Drive Two DC Motors I2C Interface 5V 3A…

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • I2C controlled, by setting 5 address jumpers, it is stackable up to 32 this modules; Reserved I2C control pins, allows to work with other control…
  • Onboard PCA9685 chip, provides 12-bit hardware PWM to adjust motor speed; Onboard TB6612FNG dual H-bridge motor driver, high efficiency, low heating
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal

Bestseller No. 4


Servo Driver HAT for Raspberry Pi/Jetson Nano 16-Channel 2-bit I2C Interface PCA9685 Driver Supports…

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • I2C controlled, using only 2 pins; Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
  • Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.; Reserved I2C control pins, allows to work with other control…

Bestseller No. 5


Waveshare Servo Driver Hat for Raspberry Pi 3B+ 3B 2B Zero WH Zero W Zero 16 Channel PWM Outputs 12…

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano
  • I2C controlled using only 2 pins. Up to 16-Channel servo/PWM outputs 12-bit resolution for each channel (4096 scales)
  • Integrates 5V regulator up to 3A output current can be powered from battery through VIN terminal
  • Standard servo interface supports common used servo such as SG90 MG90S MG996R etc.
  • Reserved I2C control pins allows to work with other control boards

Bestseller No. 6


KEYESTUDIO ReSpeaker 2-Mic Pi HAT V1.0 for Raspberry Pi 4/4B, Raspberry Pi 3 3B /2B

  • This is keyestudio ReSpeaker 2-Mic Pi HAT V1.0 shield designed for AI and voice applications. It is a low power stereo Codec based on the WM8960.
  • There are two microphones on the shield for sound collection, three APA102 RGB LEDs, one user button and two Grove connectors for application…
  • In addition, a 3.5mm audio jack or XH2.54-2PIN speaker output can be used for audio output.
  • With this shield, you can build a more powerful and flexible voice product that integrates Amazon Amazona voice services, Google Assistant, and more.
  • Technical Support: Connection Diagram, Sample Code, Using Method and Resources are provided in our wiki page. Technical support is available via email…

Bestseller No. 7


KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry Pi…

  • This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not…
  • It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without…
  • Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be…
  • Packed well in nice box, also each item packed well separately.
  • High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more.

Bestseller No. 8


KEYESTUDIO L298P Motor Driver HAT Shield GPIO for Raspberry Pi Model B/B+/A+/2/3/4 Zero and Zero W,…

  • This Motor Driver HAT gives your Raspberry Pi the ability to drive two DC motors, with drive current up to 2A.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later…
  • Reserved I2C SPI control pins, allows to work with other control boards and sensors. Comes with an IR receiver for communication with an infrared…
  • Included 4x M2.5*20MM screws, 4 xM2.5*10MM copper pillars, 4x M2.5 Nuts. Easy to install on your RPi board. Please note Raspberry Pi board, remote…
  • Search code & Documentation on wiki.keyestudio.com/KS0218_keyestudio_RPI_L298P_Motor_Drive_Shield

Bestseller No. 9


Freenove 4WD Smart Car Kit for Raspberry Pi 4 B 3 B+ B A+, Face Tracking, Line Tracking, Light…

  • This car has multiple functions. (Assembly required. Raspberry Pi and Battery are NOT contained.)
  • Provides detailed tutorial and complete code (Python) -> The download link can be found on the product box. (No paper tutorial.)
  • Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+. (2B / B+ / A+ / Zero 1.3 / Zero W is also compatible but needs extra parts.)
  • Control methods -> Controlled wirelessly by your Android devices, iPhone and computer (Windows, macOS and Raspberry Pi OS).
  • Needs battery -> See “AboutBattery.pdf” in downloaded file to buy.

Bestseller No. 10


2327 – Raspberry Pi PWM Servo Hat Development Board

  • The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will…
  • It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.
  • For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2×13 header instead of the included 2×20.
  • Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply.

Bestseller No. 11


UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not…
  • Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
  • Smaller Size: Nearly half the official size, save more space for your other hardware, can be held in the most case for Raspberry Pi.
  • Well-ventilated Environment Recommended: It’s normal to become hot when the HAT operating. Please make sure the adequate air circulation to help it…
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or…

SaleBestseller No. 12


SunFounder PCA9685 16 Channel 12 Bit PWM Servo Driver Compatible with Arduino and Raspberry Pi

  • Contain an I2C-controlled PWM driver with a built-in clock. It means, unlike the TLC5940 family, you do not need to continuously send it signals tying…
  • 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good when you want to…
  • Support using only two pins to control 16 free-running PWM outputs – you can even chain up 62 breakouts to control up to 992 PWM outputs
  • 3 pin connectors in groups of 4, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1″ so you can only stack 4 next to…
  • 12-bit resolution for each output – for servos, that means about 4us resolution at 60Hz update rate

Bestseller No. 13


KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC…
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface,…
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors.
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board.
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of…

Bestseller No. 14


HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs…
  • Terminal block pitch 3.5mm/0.138″, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion…
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not…

Bestseller No. 15


DollaTek Raspberry Pi 3 Stepper Motor HAT Full Function Robot Expansion Board for Raspberry Pi 3,Pi…

  • Full Function Robot Expansion Board Support Stepper Motor Servo For Raspberry Pi 3B / 2B / B + / Zero
  • Stepper motors are great for (semi) precise control, ideal for many robots and CNC projects
  • This hat supports up to 2 stepper motors. The python library works identically for bi-polar and uni-polar engines
  • 4 H-Bridges: Provides 1.2A bridged (3A peak) with thermal protection, internal backlash protection diodes. It can run motors on DC 5V to 12V DC. 2….
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-step. Up to 4 channels 12-bit PWM / Servo (5V). An…

Bestseller No. 16


Freenove Robot Dog Kit for Raspberry Pi 4 B 3 B+ B A+, Walking, Self Balancing, Ball Tracing, Face…

  • This robot dog has multiple functions. (Assembly required. Raspberry Pi and Battery are NOT contained.)
  • Provides detailed tutorial (download needed, NO paper tutorial) and complete code (Python) -> The download link can be found on the product box.
  • Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+. (2B / B+ / A+ / Zero 1.3 / Zero W is also compatible but needs extra parts.)
  • Control methods -> Controlled wirelessly by your Android phone or tablet, iPhone and computer (Windows, macOS and Raspberry Pi OS).
  • Needs battery -> See “AboutBattery.pdf” in downloaded file to buy.

Bestseller No. 17


HSU Development Kit for Raspberry Pi 3 Pi 4 and Arduino with 16 Different Sensor Modules,Hundreds…

  • BEST CHOICE-The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and Arduino programming.
  • COMPREHENSIVE KIT-More than 300pcs components with breadboard kit and 16 sensor models,this is the most complete kit for Raspberry Pi and Arduino in…
  • EASY CARRYING-With a durable large size protective carrying case,you can hold on all accessories inside,easy for carrying.
  • CONTINUOUS IMPROVEMENT-Additional accessories kit are added,thicker pins resistor instead of normal resistor,LCD module come with soldered pin,all…
  • Noted:Raspberry Pi Model and Recommended Micro SD Card is not included.Feel free to contact us if you have any question.

Bestseller No. 18


Freenove RFID Starter Kit for Raspberry Pi 4 B 3 B+ 400, 544-Page Detailed Tutorials, Python C Java…

  • 4 programing languages -> C, Python (compatible with 2&3), Java and Scratch.
  • 544-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
  • 204 items for 68 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
  • Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
  • Get support -> Our technical support team is always ready to answer your questions.

SaleBestseller No. 19


kuman Compatible For Arduino Raspberry pi Sensor kit, 37 in 1 Robot Projects Starter Kits with…

  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for ARDUINO, BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+
  • Complete Update and common models for arduino Mega 2560 starter kit
  • Great sensor kit with tutorials compatible for Arduino and raspberry pi.
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Detailed tutorials including project introduction and source code CAN BE PROVIDED.

Bestseller No. 20


Adafruit RGB Matrix HAT + RTC for Raspberry Pi – Mini Kit

  • Simple design – plug in power, plug in IDC cable, and run Adafruit’s Python code.
  • Onboard level shifters to convert the RasPi’s 3.3V to 5.0V logic for clean matrix driving.
  • Works with Adafruit 16×32, 32×32 or 32×64 RGB LED Matrices with HUB75 connections. You can even chain multiple matrices together for a longer display.
  • Included: RGB Matrix HAT controller. NOT Included: RGB LED Matrix (sold separately), Raspberry Pi, 5V power supply, or coin cell battery for Real Time…

How Do You Buy The Best Raspberry Pi 3 Servo Hat?

Do you get stressed out thinking about shopping for a great Raspberry Pi 3 Servo Hat? Do doubts keep creeping into your mind?

We understand, because we’ve already gone through the whole process of researching Raspberry Pi 3 Servo Hat, which is why we have assembled a comprehensive list of the greatest Raspberry Pi 3 Servo Hat available in the current market. We’ve also come up with a list of questions that you probably have yourself.


Lindsay Mendez has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Raspberry Pi 3 Servo Hat that you consider buying. Your questions might include the following:


  • Is it worth buying an Raspberry Pi 3 Servo Hat?
  • What benefits are there with buying an Raspberry Pi 3 Servo Hat?
  • What factors deserve consideration when shopping for an effective Raspberry Pi 3 Servo Hat?
  • Why is it crucial to invest in any Raspberry Pi 3 Servo Hat, much less the best one?
  • Which Raspberry Pi 3 Servo Hat are good in the current market?
  • Where can you find information like this about Raspberry Pi 3 Servo Hat?

We’re convinced that you likely have far more questions than just these regarding Raspberry Pi 3 Servo Hat, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for Raspberry Pi 3 Servo Hat, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Raspberry Pi 3 Servo Hat. Make sure that you are only using trustworthy and credible websites and sources.


Lindsay Mendez provides an Raspberry Pi 3 Servo Hat buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.

How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Raspberry Pi 3 Servo Hat currently available on the market.


This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Raspberry Pi 3 Servo Hat has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Raspberry Pi 3 Servo Hat?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Raspberry Pi 3 Servo Hat.
  5. Customer Ratings: Number ratings grade Raspberry Pi 3 Servo Hat objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Raspberry Pi 3 Servo Hat.
  7. Product Quality: You don’t always get what you pay for with an Raspberry Pi 3 Servo Hat, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Raspberry Pi 3 Servo Hat is should be an indication of how long it will work out for you.


Lindsay Mendez always remembers that maintaining Raspberry Pi 3 Servo Hat information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.


If you think that anything we present here regarding Raspberry Pi 3 Servo Hat is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!

Related Post:

Leave a Comment

Your email address will not be published.